Simpson H335162112 Panel Meter / Controller
Simpson H335 Series Hawk 3 Digital Panel Meter/Controller
Simpson H335162112
- 3.5,120V,2MARMS,4-20MA,1R,24V
- All parameters set from easy to understand front panel access
- 16 point scaling linearization
The Simpson Electric Hawk 3 Advanced Digital Panel Meter/Controller has both 3-1/2 and 4-1/2 digit displays. All LEDs are 7 segment and offer 5 brightness levels.
This high quality instrument has user-programmable parameters, all set from the front panel in easy to understand terminology. The display shows activated set point indicators (up to four). The keypad buttons have both audible and tactile feedback to prevent keystroke errors.
Installation and Panel Cutout - H335, H340, H345
Mounting Requirements
The Hawk 3 Advanced Digital Controller 1/8 DIN meters require a panel cutout of 1.77" (45mm) high by 3.62" (92mm) wide.
To install the Hawk 3 meter into a panel cutout, remove the clips from the side of the meter.
Slide the meter through the panel cutout, then slide the mounting clips back on the meter. Press evenly to ensure a proper fit. Tighten screws.
Engineering Label Placement
To replace the engineering unit label, place the tip of a ballpoint pen into the small hole at the base of the engineering label in the bezel.
Slide the label up until it pops out. Grasp and remove. Slide the new label half the distance in, then use the ballpoint pen to slide it down into place.
Value Exceeded (Example: H335) Underrange Indication Display flashes "-EEE" indicating Minimum
Value Exceeded (Example: H335) Alarm Indicators 4 LED indicators for up to four independent setpoints Linearization H335 has a 2 points
H345 has a 16 points Power Requirements AC 85 to 250 VAC or 120VAC @ 10VA DC 9 to 36 DCV @ 10VA Isolation 250V RMS MAX Note: Each supply is shown at the maximum and minimum values except the 120 VAC unit, which is allowed ± 10% ACCURACY @ 25°C as % of rdg 4-1/2 digit 3-1/2 digit DC Current High (5A, 2A) ± 0.2% of reading
± 1 count ± 0.3% of reading
± 1 count All others ± 0.05% of reading
± 1 count ± 0.1% of reading
± 1 count DC Volts High (600V) ± 0.1% of reading
± 1 count ± 0.2% of reading
± 1 count All others ± 0.05% of reading
± 1 count ± 0.1% of reading
± 1 count Resistance All ranges ± 0.1% of reading
± 2 counts ± 0.1% of reading
± 2 counts * AC Current High (2A, 5A) ± 0.2% of reading
± 2 counts ± 0.3% of reading
± 2 counts All others ± 0.1% of reading
± 2 counts ± 0.2% of reading
± 2 counts * AC Volts High (600V) ± 0.1% of reading
± 1 counts ± 0.2% of reading
± 2 counts All others ± 0.5% of reading
± 1 counts ± 0.1% of reading
± 1 counts * AC functions measured at 50 hz, include ± 1 count for each additional 100 Hz above 50 Hz Environmental Operating Temperature 0 to 50ºC Storage Temperature -10 to +60°C Relative Humidity < 80% for the temp. up to 31ºC and decreasing linearly to 50% relative humidity at 50°C Ambient Temp 25°C Temperature Drift ± 100 ppm /°C Warmup time 10 minutes Noise Rejection NMRR 60 dB @ 50-60 Hz CMRR 70 db @ 50-60 Hz Note: For indoor use to an altitude up to 200m Analog to Digital Conversion Technique Successive approximation with oversampling Sample Rate 10 conversions per second Display Rate User Programmable from 1 - 420 updates / minute (240 default)
Specifications
Display Type | Digital |
---|---|
Mounting Type | Panel |
Size Rectangular | 1/8 DIN |
Type (panel Meter ) | Digital |
Style (panel Meter) | Rectangular/Square |
Number Of Inputs (panel Meters) | Single |
Mounting (panel Meter) | Panel Mount |
Input (panel Meters) | Current |
Size-face Width | Other |
Process Output | No |
Control / Alarm Setpoints | Yes |
Water Proof | No |
Splash Proof | No |
Relay Output | Yes |
Country Of Origin | United States |